Phone: (248) 496-7375 | Fax: (803) 329-5237 | Email: ctassociates@msn.com

R&D Parts Washers
R&D Heavy Duty Parts Washer

CleanMaster 80

R&D CM80

A heavy duty parts washer for serious parts washing. Features a self-cleaning agitating lift that rises to the top for easy loading and unloading of parts. Agitation speed can be adjusted to fit your needs, from 0 to 160 agitations per minute. For use with petroleum based solvents with a flash point over 104°F.  Not to be used with chlorinated solvents.

Features
  • Pre-set 120 psi filter regulator with auto drain
  • Lift operates on 120 psi air pressure
  • Flow-through hand held brush
  • 12-gauge tank thickness
  • Agitation speed adjustable from 0 to 160 agitations per minute
Specifications
  • Overall dimensions: 52½" L x 34" W x 66½" H
  • Inside dimensions: 44½" L x 27¼" W x 28" D
  • Carrier dimensions: 41½" L x 17½" W
  • Shipping dimensions: 56½" L x 36½" W x 56" H
  • Shipping weight: 556 lbs.
  • Fluid capacity: 80 gallons
  • Maximum fluid depth: 15¼"
  • Minimum fluid depth: 9¼"
  • Load lift over: 38"
  • Load capacity: 250 lbs.
  • Lift requirements: 8CFM @ 120PSI
  • Voltage: 115V / 60HZ / 1PH / 1 Amp
  • Pump: Fractional
Accessories & Parts
  • 61647 50 Micron filter kit
  • 54961 Bolt-on light kit
  • 02923 Industrial light kit
 
Return to main Fountain Industries page

 



This Page Copyright 2005 C.T. & Associates LLC. all trademarks, copyrights, and registered logos belong to their respective owners

Main  |    Contact Us   |  Product Lines  |  Manufacturer's Web Sites

Phone: (248) 496-7375 | Fax: (803) 329-5237 | Email: ctassociates@msn.com