Phone: (248) 496-7375 | Fax: (803) 329-5237 | Email: ctassociates@msn.com

Kleentec Kleer-Flo
Two Level CleanMaster Parts Washers

  For demanding jobs get twice the machine.

Model J80

Largest pump-agitated CleanMaster model, for efficient cold immersion cleaning. Accommodates large parts such as cylinder heads and shafts.
Unique features that make Clean Master the industry standard:

  • Dual filtration keeps working solution clean. Barrier filter removes heavy sludge before pump intake. Cartridge filter provides final filtration - helps ensure removal of abrasive particles that could damage bearings or other critical components. Pump agitation
  • Fire-stop cover of double-wall steel construction is held open with fusible link - closes automatically in case of fire
  • Rugged construction throughout. Cabinet is heavy-gauge steel with baked enamel finish. Exposed edges are rolled for strength and safety. Corners are welded and smooth finished. Comes with parts basket
  • Easy-to-use, with comfortable working height, on-off switch and indicator light, and casters for easy movement.

Lower level immersion chamber automated parts cleaning- frees technicians for more productive work.

Vigorous agitation loosens dirt and shears off deposits of oil and grease

Full-width upper level cleaning area is created by folding work shelves over immersion chamber

Operators can rinse parts under flow of solution from stay- put hose- or clean oversized parts- all while other parts are being cleaned in the immersion chamber below.

Model 70

Same dimensions, capacity and two-level features as Model J-80, but uses shop compressed air for agitation of solution in the immersion chamber. A pump circulates solution through filters and stay-put hose. Kleentec Kleer-Flo CleanMaster two level parts washer

Specifications:

Work shelf: 44.5"L x 23"W
Work shelf Capacity: 300 lbs.
Electrical Requirements: 115V 1ph
Shipping Weight: 252 lbs.
Fluid Capacity: 45-55 gallons
Filter System: Barrier and Cartridge
Parts Basket: 18" x 14.75" x 4.25"

Model 65 & 60

Features:

  • Dual-Filtration keeps working solution clean - helps remove abrasive particles that could damage bearings or other critical parts

  • Continuous circulation through stay-put hose with adjustable flow control

  • Parts basket suspends on upper brackets above solution to provide work area and internal drying shelf

  • Accommodates a second parts basket, Model 08A, available as an accessory

  • Fire-stop cover closes automatically in case of fire

  • Heavy-gauge welded steel cabinets with rolled edges

  • Indicator light shows operating mode

  • Basket rests on lift-out grate inside immersion chamber - keeps parts above sediment

  • Easy cleanout - new design provides unobstructed tank bottom and large drain with exterior valve

  • Pump agitation.

Specifications: Kleentec Kleer-Flo J80 CleanMaster two level parts washer

Operating Range: 30-35 Gallons
Work shelf and Immersion Chamber
: 33"L x 22"W x 14.25"D
Agitation:
Pump
Machine Overall:
41.5"L x 22"W x 36.5"H
Height (cover up):
59"
Pump Motor:
Fractional
Electrical Requirements:
115V 1ph
Barrier Filter:
Standard
Cartridge Filter:
Standard

Return to the main KleenTec/Kleer-Flo page

Return to the CleanMaster line

 



This Page Copyright 2005 C.T. & Associates LLC. all trademarks, copyrights, and registered logos belong to their respective owners

Main  |    Contact Us   |  Product Lines  |  Manufacturer's Web Sites

Phone: (248) 496-7375 | Fax: (803) 329-5237 | Email: ctassociates@msn.com