Phone: (248) 496-7375 | Email: ctassociates@msn.com

quick-fit ducting
Nordfab Quick-Fit Ducting

industrial ducting

Jump To:
Features  |  Quick-Fit Applications  |  Spark Trap

Nordfab Quick-Fit Ducting

(248) 496-7375
Call an Expert Today

Quick-Fit Ducting is a snap! With this versatile and easy to use clamp together duct you can say goodbye to complicated cutting, riveting and brazing. Installing Quick-Fit ducting is so easy it can be done in HALF the time it would take to put in traditional ductwork. Where is Quick-Fit Used?
Lime Processing
Weld Fume Extraction
Condensation Control
Oil Mist Collection
Carbon Dust Collection
Boat Dust Collection
Concreate Dust Collection
Paper Processing
Recycling Equipment
Food Manufacturing
Coffee Roasting
Textile Production
and much more!
 
Quick-Fit puts the squeeze on costly conventional duct installation
No complicated cutting, no riveting, no brazing or welding required. One Q-F clamp connects sections together in seconds. Branches, diverters, elbows - all adapt easily to your existing duct and may be taken apart and re-used or cleaned without special tools.
 
Quick-Fit is easy to install, easy to align, and it's strong!
Q-F clamps are so easy to install, they almost install themselves. Simply place the clamp over the rolled lip ends and snap! The extraordinary strength of Q-F's specially machined doubled rolled lips provides a solid, straight run. The patented Q-F clamp connects the rolled ends. Snap the Q-F clamp and you have the strongest, safest, most re-usable dust extraction pipetting available. No special instructions or skills are need to assemble a Quick-Fit system. Install new lines, clean out lines or make changes to existing duct runs anytime you need to with Q-F.
 
Quick-Fit adapts to your every need; connect to the old or bring in the new
Q-F has everything you need in galvanized, stainless steel, and aluminum parts:
  • Laser Welded pipe in diameters from 3" to 24"
  • Branch fittings in all sizes and shapes
  • Elbows in 30°, 45°, 60°, 90°
  • Larger custom sizes and special adapters
  • Square to Round duct adapters
  • Spark Traps and Explosion Isolation
  • Blast Gates, Diverter Valves, Hoods, Manifolds
Quick-Fit adjusts to fit - without complicated measurements
Planning to add, remove, or replace dust extraction piping? Q-F's adjustable fittings slide together to create the precise length. No need to waste time on exact measurements and precision cuts. Simply slide on and fit to your desired length, a few inches or a few feet. Need a different length for a new run? Just re-use your Q-F components and re-fit, again reducing your cutting and installation time.
 
Quick-Fit saves you time and money
Quick-Fit ducting installs in half the time (sometimes less) of traditional ducting, resulting in less down time and less money spent on labor and special tools. Just how much money will you save using Q-F? Call us! You will be pleased with the savings and all the built-in advantages you get with Quick-Fit ducting. As an authorized Nordfab dealer with more than 20 years of experience we can help you get the most out of your Q-F ducting.
 
Call (248) 496-7375 to learn more about the world's fastest ducting, or email us at ctassociates@msn.com.
Return to C.T. & Associates main page
Back to Top
 

 
Quick-Fit Ducting Applications
 
Lime Processing in the Mining Industry
limestone processing
 
Nordfab Quick-Fit for Oil Mist
 
Condensation Control
condensation ductwork
 
Boat Dust Collection
boat dust collector
 
Flour Processing
food grade ducting
 
Oil Mist Collection
ducting for oil mist
 
Automotive Weld Exhaust Fume Extraction
fume exhaust piping
 
Recycling Equipment
recycling pipe
 
Call (248) 496-7375 to learn more about the world's fastest ducting, or email us at ctassociates@msn.com.
Return to C.T. & Associates main page
Back to Top
 

 
Spark Trap
(248) 496-7375
For businesses that deal with combustible dust, fire prevention is extremely important. A fire or explosion in your facility can easily result in the injury or death of employees, damage to equipment, tremendous down-time, or even the loss of an entire building. Although some materials, like aluminum, may not burn in larger pieces, in the right conditions their dust can be highly combustible. Fortunately, Nordfab has several solutions including the new In-Line Spark Trap. If your facility processes materials such as aluminum, bronze, magnesium, agricultural or chemical dust, we encourage you to contact us right away. A full list of combustible dusts compiled by OSHA can be found here.
 
NEW!

Nordfab In-Line Spark Trap

The chances of a fire in your cyclone or collector can be greatly reduced with the Nordfab In-line Spark Trap. With minimal pressure loss, and no moving parts, this spark trap operates on the principle of disrupting the laminar airflow causing sparks to cool and extinguish before they can enter the cyclone or collector.

The In-line Spark Trap fits easily into existing Quick-Fit ducting systems, and can be added to other systems with a simple adapter. It can be removed for easy cleaning and requires no calibration. The Nordfab In-line Spark Trap is a simple, inexpensive way to reduce the incidence of fires.
 
 
Call (248) 496-7375 to learn more about the world's fastest ducting, or email us at ctassociates@msn.com.
Return to C.T. & Associates main page
Back to Top
 
Jump To:
Features  |  Quick-Fit Applications  |  Spark Trap

 



This Page Copyright 2005 C.T. & Associates LLC. all trademarks, copyrights, and registered logos belong to their respective owners

Main  |    Contact Us   |  Product Lines  |  Manufacturer's Web Sites

Phone: (248) 496-7375 | Email: ctassociates@msn.com